How to Set Up Document Policies
Set up a document once and use it on every trip you choose, either as a file you share or a file you ask travelers for.
A document policy is one document, the trips it reaches, and when travelers get it. You set up policies once under WP Travel Engine > Settings > Extensions > Documents, and every trip you choose uses them. This page is part of the Documents add-on.
Available from Documents 2.2.0, with WP Travel Engine 6.9.0.
Note: Changes on the Documents settings screen are saved only when you click Save Settings at the bottom of the screen. A green message appears when you add or delete a policy, but the change is not saved until you click Save Settings.
Adding a Document You Share With Travelers
Use this for files you hand out: kit lists, itineraries, joining instructions, visa guides.
- Go to WP Travel Engine > Settings > Extensions > Documents.
- On the Policies tab, click Add policy.
- Under Which way does it go?, select You provide it.
- Enter the File name. Travelers see this name, for example "Everest Base Camp Kit List".
- Enter a Short description if it helps. The limit is 90 characters.
- Under File, choose a file:
- From your library: select a file you uploaded before.
- Upload new: click Choose a file and upload a PDF, DOC, DOCX, JPG or PNG up to 20 MB. The new file is added to your library too.
- Under Which trips?, select Every trip or Trips you pick. See Choosing Which Trips a Policy Reaches.
- Under When do they get it?, select one:
- On the trip page: anyone can see it before booking.
- On their dashboard: only travelers who booked see it, in My Account.
- Check the What the traveler sees preview at the bottom of the drawer.
- Click Add policy. A message says the policy was added.
- Click Save Settings.
[Screenshot: Add policy drawer with "You provide it" selected, File name "Everest Base Camp Kit List", file EBC-Kit-List-2026.pdf, "Trips you pick" with 2 trips]
Tip: If you leave File name empty and pick a file from the library, the file name fills it in. Change it to a name travelers will understand.
Asking Travelers for a Document
Use this for files you need from travelers: passport scans, signed waivers, travel insurance, medical forms.
- Go to WP Travel Engine > Settings > Extensions > Documents.
- On the Policies tab, click Add policy.
- Under Which way does it go?, select You ask for it.
- Enter What are you asking for?, for example "Passport photo page".
- Enter a Short description. Travelers see it as a message under the document name, so tell them what a good file looks like: "Photo page only, all four corners visible".
- Under Which trips?, select Every trip or Trips you pick.
- Under Who does it belong to?, select one:
- The booking: one file for the whole group, such as a signed group waiver.
- Each traveler: one file for each person, such as a passport. A booking of 4 travelers owes 4 files.
- Click Add policy, then click Save Settings.
A requested document is always collected after booking. Travelers upload it from My Account. See How Travelers Download and Upload Documents.
[Screenshot: Add policy drawer with "You ask for it" and "Each traveler" selected, preview showing "0 of 2 uploaded"]
Choosing Which Trips a Policy Reaches
Every policy in WP Travel Engine > Settings > Extensions > Documents reaches either all trips or a list of trips.
- Every trip: the policy reaches all your trips, including trips you create later.
- Trips you pick: click the trip list, search, and tick each trip. Picked trips show as chips. Click Clear to remove them all.
The trip list shows up to 200 published trips. Draft trips do not appear.
To keep a policy off one trip without changing the policy, open that trip and switch the policy off there. See Switching a Policy Off for One Trip.
Editing, Switching Off and Deleting a Policy
The Policies tab lists every policy with the columns Document, Applies to, Where and Action. Use Search policies to find one by name or file name.
Edit a policy
- Click the pencil icon in the Action column.
- Change the fields and click Save policy.
- Click Save Settings.
Trip pages show the change right away. Bookings already made keep the name and description they were given. To give booked travelers a new version of a file, replace the file in the Library. See Replacing a File.
Switch a policy off
Click the switch in the Action column, then click Save Settings. A switched-off policy reaches no new booking and no trip page. Bookings that already have it keep it. Switch it on again at any time.
Preview a policy
Click the eye icon. A shared file opens in a preview. A requested document shows What the traveler sees, the request as it appears in the traveler's account.
Delete a policy
- Click the bin icon. A window asks Delete this policy?
- Read the message and confirm.
- Click Save Settings.
What happens to bookings when you delete a policy:
| Policy type | What happens |
|---|---|
| You provide | The file is removed from Shared with you on every booking that has it. The file stays in your library. |
| You ask for | Travelers who already uploaded keep their file. Travelers who have not uploaded are no longer asked. You see the request on the booking with the label Policy deleted. |
Deleting cannot be undone. If you only want to stop using a policy for new bookings, switch it off instead.
Managing Files in Your Library
The Library tab under WP Travel Engine > Settings > Extensions > Documents lists the files you hand out. Every file here is also in your WordPress Media Library. The Used by column shows how many policies use the file and how many trips it reaches, for example, "1 policy, 42 trips". Not used yet means no policy uses it.
Upload a file
- Click Upload file.
- Choose one or more files. Files can be PDF, DOC, DOCX, JPG, or PNG.
- Click Save Settings.
You can also add files while creating a policy with Upload new.
Replace a file
Use this when you have a new version, for example, the 2027 kit list.
- Click the replace icon in the Action column and choose the new file.
- If a policy uses the file, a window asks Which bookings get the new file?
- Existing and new bookings: bookings that already have the old file get the new one too.
- Only new bookings: bookings already made keep the old file.
- Click Replace file. A message says File replaced. Every link still works.
- Click Save Settings.
Trip pages always show the new file.
Delete a file
- Click the bin icon and confirm Delete this file?
- Click Save Settings.
You can delete any file, including one a policy uses. That policy shows No file chosen and stops appearing on trip pages and new bookings until you pick another file. Deleting from the Documents library does not delete the file from your Media Library.
Changing the Section Heading and Description
The heading and description show on the trip page above the list of documents.
- Go to WP Travel Engine > Settings > Extensions > Documents > Settings.
- Enter the Section heading, for example, "Trip documents".
- Enter the Section description. It shows under the heading.
- Click Save Settings.
You can change both for one trip in that trip's Advanced Settings > Documents tab.
Use Cases
A kit list for every trek
You run 12 treks in Nepal. You create one policy "Trekking Kit List", You provide it, Every trip, On the trip page. All 12 trips show the kit list, and a trek you add next month shows it too.
A passport from every traveler on 2 trips
Your Tibet and Bhutan tours need passport details for permits. You create "Passport photo page", You ask for it, Trips you pick (the 2 tours), Each traveler. The Garcia family books 3 travelers on the 8-Day Bhutan tour and owes 3 passport scans.
A new kit list for 2027
You upload "EBC-Kit-List-2027.pdf" as a replacement for the 2026 file and select Only new bookings. Travelers who booked in 2026 keep the list they were given. Everyone who books from now gets the 2027 list.
What Happens When...
If you add a policy after bookings were made
- Traveler: Travelers on bookings for that trip see the new document or request the next time the booking is opened.
- Record: Not recorded in Activity Logs.
If you edit a policy's name or description
- Traveler: The trip page shows the new wording. Booked travelers keep the wording they were given.
If you switch a policy off
- Traveler: New bookings and trip pages no longer show it. Bookings that already have it keep it.
- What to do: To remove it from one booking, use Removing a Shared Document.
If you delete a policy
- Traveler: A shared file disappears from Shared with you on all bookings. A request disappears if the traveler has not uploaded yet.
- Record: You see the closed request on the booking with Policy deleted.
- What to do: Switch the policy off instead if you only want to stop it for new bookings.
If you delete a file a policy uses
- Traveler: The document stops showing on trip pages and new bookings.
- What to do: Edit the policy and pick another file.
If you delete the file from the WordPress Media Library
- Traveler: The document disappears from trip pages and from every booking because the file no longer exists.
- What to do: Upload the file again and pick it in the policy.
If a trip is removed from a policy
- Traveler: The trip page stops showing the document. Bookings already made keep it.
What You Cannot Do
- You cannot set a different file for different trips in one policy. Create a second policy, or add a trip-only document.
- You cannot pick more than the first 200 published trips in the trip list.
- You cannot ask for a document before booking. Requested documents are always collected after booking.
- You cannot undo a policy deletion after Save Settings.
FAQs
Why is my new policy not showing on the trip page?
Check 4 things: you clicked Save Settings, the policy switch is on, When do they get it? is On the trip page, and the trip shows documents through the Documents trip tab or a shortcode. See Showing Documents on the Trip Page.
What does the Imported label mean?
An Imported policy is a file from the old File Downloads settings. It keeps working the way it did before. When you edit it and click Save Settings, it becomes a normal policy, and the label goes away.
Does a new policy reach bookings already made?
Yes. A new policy reaches existing bookings on the trips it covers. The message after adding says "including bookings already made".
If I change a policy, do booked travelers get the new version?
No. Booked travelers keep the name, description and file they were given. To give them a new file, replace it in the Library and select Existing and new bookings.
Can I undo a deleted policy?
No. Create the policy again. Files travelers uploaded for it are still on their bookings.
Why does a policy say "No file chosen"?
The file it used was deleted from the library. Edit the policy, pick a new file, and click Save Settings.
What is the difference between switching off and deleting a policy?
Switching off stops the policy for new bookings and trip pages. Bookings that have it keep it. Deleting also removes shared files from existing bookings and closes open requests.
If you're still stuck or have a question we didn't cover, our support team is happy to help. Reach out at our support page and we'll get you sorted.